Vertical Shaft Impact Crusher/Sand Making Machine/Sand Crusher/Sand Machine for Fine Crushing

Sand Crusher,Sand Making Machine,Sand Maker,Vertical Shaft Impact Crusher,Sand Machine,PCL Crusher,sand making machine, sand maker, vertical shaft impact crusher, fine crusher, sand making producing line, sand producing plant, mobile sand making plant, mobile sand maker, machine for sand-making purpose, equipment for sand-making purpose

PCL Series Vertical Shaft Impact Crusher(Sand Making Machine)

Sand Making Machine(Sand Crusher) is widely used in fine crushing and rough grinding of metal, mineral, building aggregate, concrete, anti-fire material, glass raw material, manufactured sand and all kinds of metallurgical slug. It is also can utilized in shaping of high rank road surface. Compared with other kind of crusher, it is more advanced in intermediate hard, extra hard and abrasive material crushing, such as gravel, quartz, sandstone, basalt, silicon carbide, diamond grain and sintered bauxite.

1. New generation.
2. High effective.
3. German technology.
4. ISO9001: 2008.

Features:

1. Deep cavity type rotor after optimization design, through material quantity increases by about 30%.
2. High sand-making ratio; good size and shape.
3. With functions of finely, coarse grinding.
4. Week guard can use back up and down after partial wear, improve material utilization, can improve the service life 48% longer.
5. Little affected by the material moisture content; water content up to 8% is available.
6. "Stone hit stone", "stone hit the iron" easy conversion; high efficiency and energy saving, high crushing ratio.
7. Cube structure, high bulk density, and small iron contamination.
8. Less wear of impeller from the lining, easy maintenance.
9. Sand Crusher Low wearing parts consumption design of the best material impact angle of crushing cavity. Less friction between wear parts, 30% lower than conventional equipment running cost.

Operating Principle

Material from the hopper into the body, the distributor will material is divided into two parts, part from the distributor in the middle to high speed rotating impeller chamber, within the impeller was accelerated rapidly, its acceleration can be up to several hundred times the gravitational acceleration, and then at the speed of 60-70 - m/s from three uniform mass ejection of the flow passage of impeller to go out, the other part of the distributor all around, and then hit with vortex cavity lining material and be lining material rebound, oblique upward shocks to the top of the vortex chamber, and change the direction of movement, deflecting downward movement, emitted from the impeller passage of material to form a continuous material. Such a piece of material is impacted, grinded and crushed twice or more in the vortex broken cavity. The grinding materials discharge from the bottom discharging opening. In the process, materials impacting and rubbing with lining crush finely with each other without direct contact with metal components. So the iron pollution reduces and mechanical wear prolonged. Ingenious self circulation in the vortex chamber makes no powder pollution.

Technical Parameters